What Are The Problems With The Cement Dosage And Dosage Ratio Of Foam Concrete?

Foam concrete is a building material made of cement, sand, expansion agent, water and other raw materials. It features a moderate amount of foam mixed in, making it lightweight and with excellent thermal insulation properties. However, since the ratio of each raw material will affect the quality of foam concrete, the ratio issue is very important. Regarding the proportion of foam concrete, the most common lesson is the amount of cement.

Generally speaking, the cement dosage of foam concrete is proportioned according to a fixed ratio, usually 1:3:3 (the ratio of cement, sand, aggregate), with some expansion agent and water added, and adjusted according to actual needs. However, the exact amount of cement required depends on the situation.

In the foam concrete ratio, the amount of cement depends on many factors such as the selected cement grade, grade, sand, and stone selection. In addition, a reasonable proportion needs to be carried out according to the strength requirements of the concrete. Because the stronger the concrete, the more cement is needed.

From experience, the cement dosage of ordinary foam concrete is generally about 250 kilograms per cubic meter. But this is only a rough reference value, and the actual dosage needs to be determined based on specific circumstances. When choosing cement, try to choose products with good quality and stable performance to ensure the quality of foam concrete.

In the process of preparing foam concrete, you also need to be careful not to use too little cement. If the amount of cement is insufficient, the strength and hardness of concrete will be affected to varying degrees, directly affecting the service life. Therefore, when preparing foam concrete, the cement dosage should be reasonably controlled according to the actual situation.

In short, the cement dosage of foam concrete mainly depends on the strength requirements of the concrete and its proportion. When mixing ingredients, cement with good quality and stable performance should be selected as much as possible to ensure the stability and performance of foam concrete. If you want to get a better proportioning effect, it is recommended to consult a professional home decoration designer or a skilled foam concrete engineer to get more accurate proportioning suggestions.

Inquiry us